}
Showing posts with label Stephanie Low. Show all posts
Showing posts with label Stephanie Low. Show all posts

Wednesday, January 31, 2018

Yarn Handmade - Just for You

Hello friends -thanks for stopping by today! I am loving the new Spellbinders Handmade Collection by Stephanie Low.  Perfect stamps and Dies for any creative person - definitely not limited to paper addicts! Wink:wink!!  As someone who has kitted since I was 6 years old - this set appeals to me greatly!


I have stamped a knitted block of five (5) rows of the knitted strip from theYarn Handmade by Stephanie Low Stamp and Die Set  using Imagine Memento Inks in Tuxedo Black and  three separate rows Teal Zeal.  The block pattern has been coloured in pink and the zeal in blue - using Chameleon Pens.  The blue knitted strips have been cut/embossed using the co-ordinating dies and the Platinum 6 Die Cutting and Embossing Machine. 

The knitted block has been trimmed around the edges and the the blue strips popped up on alternating rows of knitting using Crafty Foam Tape - starting at the top of the block. The layered card front has been popped up onto a card front embossed using the Embossing Folders Tammy Tutterow Designs Horsehair and sponged using Teal Zeal ink and a sponge dauber.  All layers have been adhered to a pre-cut white card base using Scrapbook Adhesives by 3L E-Z Adhesive Runner Ultra.


Next I have stamped two lots of flowers using  Imagine Memento Inks in Tuxedo Black and coloured using Chameleon Pens and cut/embossed using the co-ordinating Dies.  Next they have been adhered to opposite corners. Scrapbook Adhesives by 3L small white 3D Foam Squares have been added under the flowers, each side of the knitted strip.


The sentiment and kitting have been stamped Imagine Memento Inks in Tuxedo Black, coloured using Chameleon Pens and cut/embossed using the co-ordinating Dies.  Next they have been adhered to the centre of the card with Scrapbook Adhesives by 3L small white 3D Foam Squares underneath on each side of the knitted strip.


This card is linked to the following challenges:
Color Inspiration Monday - ALWAYS ANYTHING GOES WITH HAND-COLORED IMAGE
Crafty Awesomeness - January Anything Goes
Crafty Awesomeness - January Anything Goes
World Wide Open Design Team Challenge - Always Anything Goes 
Ike's World january Challenge - Anything Goes with New Beginnings (new stamps)
World Wide Open Design Team Challenge - Always Anything Goes 
Creative Fingers Challenge - Anything Goes

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting

Tuesday, January 30, 2018

Grateful for You

Hello friends - thank you for stopping by! Yesterday I shared a tutorial using one of the Spellbinders Stamp and Die sets (you an find it HERE) and had a stamped image left over put that together with the fact that I have been busy 'pottering' with leftover papers - the ones that are too pretty to throw out but can't sit around and clutter my desk for too much longer - do you have the same thing happen - or is it just me?! Wink:wink!! It all has to add up to a card....


The card front has been created by adhering some of my favourite left over pieces of patterned paper, from DCWV and Graphic 45, to some recycled cardboard.  This has been cut/embossed using the Spellbinders Nestabilities Labels Thirty-Eight Etched Dies #6 (#1 being the smallest) The card base has been cut using white card stock using  Labels Thirty-Eight #7 and the Platinum 6 Die Cutting and Embossing Machine – 6″ Platform.


The feather from the One of a Kind Handmade by Stephanie Low Stamp and Die Set has been stamped using black ink and coloured using Chameleon Pens.  It has then been cut/embossed using the co-ordinating die and popped up onto the centre of the card front using Scrapbook Adhesives by 3L 3D Foam Squares


.  A computer generated sentiment has been adhered below the feather using Scrapbook Adhesives by 3L E-Z Adhesive Runner Ultra.  Sequins have been randomly added


This card is for the following challenges:
Artistic Stampers Anything Goes
613 Avenue Create -  Anything Goes w/Optional Twist: Something New (stamps)
Creative Fingers - Anything Goes
Fashionable Stamping - Anything Goes
Love to Craft - Anything Goes
heARTful Stamping Challenge - Anything Goes + a Stamp
CCEE Stampers Your Favourite Technique (die cutting)
The Corrosive Challenges - Always Anything Goes
Crafty Creations - Always Anything Goes
Creative Moments - Always Anything Goes 
House That Stamps Built - Anything Goes
Inspiration Destination - Always Anything Goes
WordArt Wednesdays - Anything Goes

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting

Sunday, January 21, 2018

Spellbinders -Geo Dots - Enjoy Your Day

Hello friends - thanks so much for stopping by! It is Sunday here in the Nations Capital and we are experiencing a HEATWAVE, along with many other regions in Australia.  I did manage a bit of time in The Studio and have a very quick and easy card to create - using Spellbinders Geo Dots Stamps Cool Vibes by Stephanie Low - it is perfect as a background or as the focal point on a card.


I have randomly inked the stamp using Tool 'n One with the Foam Applicator - Circle for Tool 'n One
and Imagine Memento Ink in Teal Zeal and Angel Pink, along with Memento Luxe Rose Bud ink.  Once dry this has been cut/embossed using the A2 Curved Matting Basics B Card Creator Etched Dies #6  (#1 being the smallest) and the Platinum 6 Die Cutting and Embossing Machine - 6" PlatformThe card front has been popped up onto the card base that  has been cut/embossed using the larger die (#7) using Scrapbook Adhesives by 3L Crafty Foam Tape.




Want2Scrap Black Baby Bling has been randomly added to the card front and a computer generated sentiment, trimmed to size and adhered using Scrapbook Adhesives by 3L E-Z Permanent Adhesive.


This card is linked to the following challenges:
Crafter's Castle Anything Goes
Crafting with Dragonflies - Anything Goes Cards only 
Brown Sugar – Birthday
QKR Stampede - Anything Goes
Quick Quotes - Anything Goes
Aud Sentiments Challenge - Anything Goes 
Inspiration Destination - Always Anything Goes
Simon Says Wednesday - Add Sentiment
The Crafty Addicts Anything Goes
WordArt Wednesdays - Anything Goes
Always Happy Birthday - Birthday + PINK Card Base
Artistic Stampers - Anything Goes
Unicorn Challenge - Anything Goes

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting

Friday, January 19, 2018

Spellbinders Pretty Handmade - Make Pretty Things

Hello friends -thanks for stopping by today! I don't know about you but I always look forward to seeing what is new with companies and this year is no different.  I am loving the new Spellbinders products and have been playing with some of the Handmade Collection by Stephanie Low.  Perfect stamps and Dies for any creative person - definitely not limited to paper addicts! Wink:wink!!


I have stamped the Pretty Handmade by Stephanie Low Stamp and Die Set using Imagine Memento Inks in Tuxedo Black and Teal Zeal.  They have been coloured using Chameleon Pens and cut/embossed using the co-ordinating dies and the Platinum 6 Die Cutting and Embossing Machine. 


Next I have cut/embossed the Shapeabilities Seth Apter Drip Dry Etched Dies twice, once in orange and one in yellow. The yellow die has been adhered slightly offset onto the orange die - to create a shadow effect.  This has been glued to a card front that has been cut/embossed using the A2 Curved Matting Basics B Card Creator Etched Dies and been lightly sanded using a sanding block.


The sentiment has also been Die cut and popped up into the card front.  The card front is popped up onto card base that has also been cut using the A2 Curved Matting Basics B Card Creator Etched Dies.  I have used Scrapbook Adhesives by 3L 3D Foam Squares to add dimension to each layer.


This card is linked to the following challenges:
Simon Says Wednesday - Add Sentiment
Stampaive and More - Something New
Crafty Creations Challenge - Anything Goes
Sunny Day Crafting -"C" is for Color It
Artistic Stampers - Anything Goes
Crafty Awesomeness - Anything Goes
Die Cut Divas Do or Use Something New
Stempelsonnen Challenge - Always Anything Goes
A Snowflakes Promise - Anything Goes
Deep Ocean Challenge - Something New

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting

Wednesday, January 17, 2018

Spellbinders - Some Bunny...

Hello friends - thank you for stopping by!  It is Tuesday evening for me and I have been enjoying family time along with time in The Studio.  Once again I have been playing with a few of my Spellbinders products (no surprises there! Wink:wink!) 


 I have stamped the gorgeous rabbit from the Bunny Stamp and Die Set from the Spring Love Collection by Stephanie Low using Imagine Memento Ink in Tuxedo Black.The rabbit has been coloured using Chameleon  Pens - another favourite product - and cut/embossed using the co-ordinating die and the Platinum 6 Die Cutting and Embossing Machine.


 #3 #4 (#1 being the smallest) using white card stock - layer onto slightly larger black card stock.  Cut/emboss one  Nestabilities Hemstitch Rectangles Etched Dies Venise Lace by Becca Feeken #5 #6 using patterned paper.  Pop up onto a pre-cut white card base using Scrapbook Adhesives BY 3L Crafty Foam Tape.   Add a row of yellow lace across the lower portion of the card front.


Pop up the rabbit onto the smaller Hemstitch Rectangles,popping up onto the layered card front.  Add a row of yellow lace across the smaller Hemstitch Rectangle. Glue a double Seam Binding bow to the left of the Die but image, adding a button to the know, glue a Want2Scrap large white pearl to the centre of the button.


This card is linked to the following challenges:
QKR Stampede - Anything Goes
Crafter's Castle Anything Goes
Sweet Stampin - Lots of Layers
4 Crafty Chicks - No Blue Colour
Craftaholics R Us - Patterned Paper
Simon Says Wednesday - Patterned Paper
Tuesday Throwdown - Layer it Up
Artistic Inspirations - ANYTHING GOES +  OPTIONAL THEME ANYTHING GOES
Colouring in Scrapland - ANYTHING GOES
Get Creative Challenges - PEARLS AND LACE 
Stamps & Fun = Creativity - USE A STAMP
2 Crafty Critter Crazies - Anything Goes with a Critter
Artistic Stampers - Anything Goes
Card Mania - Monochromatic
Craft-Dee BowZ - Anything Goes with a Handmade Bow
Crafty Animals - Always Anything Goes
World Wide Open Design Team Challenge - Always Anything Goes 

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting

Friday, January 5, 2018

SB Hydrangea Happy Birthday Card

Hello friends - thanks so much for stopping by!  It has been a beautiful day here in the Nations Capital and I managed to spenda little time outside enjoying the sun and the garden - I love Hydrangeas but sadly we don't have any at the moment - but working on it!!  


In the meantime I have stamped the hyderangea from the Bunny Stamp and Die Set from the Spring Love Collection by Stephanie Low using ImagineMemento Ink in Tuxedo Black.  The flower has been coloured using Chameleon  Pens - and cut/embossed using the co-ordinating die and the Platinum 6 Die Cutting and Embossing Machine.

 

Cut/emboss one Nestabilities Celebrations Pierced Squares Etched Dies #5 #6 (#1 being the smallest) using Kaisercraft Golden Grove Patterned paper. Pop up onto a pre-cut white card base using Scrapbook Adhesives BY 3L Crafty Foam Tape.  Pop up the die cut Hydrangea on the left side of the card using Scrapbook Adhesives BY 3L 3D Foam Squares.


Layer a pre-cut Kaisercraft sentiment, also from the Golden Grove Collection, onto a Nestabilities Classic Scalloped Circles SM Etched Dies #2 (#1 being the smallest) using Scrapbook Adhesives BY 3L 3D Foam Squares.  Adhere the layered sentiment onto the lower right hand side of the card front using E-Z Runner® Grand Ultra Strong 


Glue a double bow using May Arts Ribbon to the stems of the flowers and add a recycled button with the shank removed to the knot.  a few random splashes have been used by dripping a glimmer spray nozel 


This card is linked to the following challenges:
Simon Says Wednesday Something New (The paper)
Craftaholics R Us - W, #1 - Celebration 
Pause Dream Enjoy - Die Cuts
Scrapy Land Challenge - Anything Goes
Hiding In My Craft Room Challenge - Free Style/Anything Goes
Artistic Stampers - Anything Goes
Craft-Dee BowZ - Anything Goes with a Handmade Bow.
Creatilicious Challenge - Anything Goes - optional wishes
Life in a Snapshot Celebration Theme
Crafty Girls Challenge - Anything Goes
One Crazy Stamper - Anything Goes + use purple or blue + add a button or ribbon
Lemon Shortbread Challenge - Anything Goes
Pearly Sparkles Challenge Anything Goes
Unicorn Challenge - Anything Goes
Stempelsonnen Challenge - Always Anything Goes
World Wide Open Design Team Challenge (M, P15, E3, F, must be on DT) Always Anything Goes 

Thank you for your comments and all of the support you give me - you make blogging such an amazing place to be!! Your encouragement is such a blessing for me - it makes my day! God bless you!

{{{hugs}}} and happy crafting